Used Gear Sales
Control Electronics – Sound & Lighting
Roland M-200i / Lightly used demo unit. $2,100 shipping included.
•32-channel digital mixer (controllable with or without iPad)
•17 motorized faders, dedicated buttons and knobs for key functions
•24 onboard inputs and 14 outputs – expandable up to 64 x 54
•Fully featured, comprehensive iPad control for all major functions
•Wireless and wired iPad control (two at same time)
•Easily expandable to include personal mixing and multi-channel playback/record
•Multi-channel recording up to 40 channels
Sony SRP-X700P, Digital Powered Mixer / Used $300 plus shipping.
The SRP-X700P Digital Powered Mixer has been designed for modern presentation systems that are required to process material from a wide range of sources including microphones, video, audio, DVD players, audio tape recorders as well as PCs.
This unit integrates the functionality of seven (7) traditional presentation devices in a compact 3U rack mountable chassis! By utilizing digital processing and control technology, the SRP-X700P offers an impressive set of features, high-quality processing and ease of operation!
The SRP-X700P delivers a six input RGB/video switcher which allows a variety of video and PC graphic sources to be routed to the presentation system.
Up to two Sony WRU-806 wireless tuner units can be directly installed making it simple to integrate a high quality Sony wireless system into the presentation system.
MBT Chase – 8 Channel Console -Used $50 plus shipping.
Use with your CHASE8 relay pack for remote operation.
Provides the same control features as the CHASE8 plus eight individual on/off switches to manually control a channel while the unit is chasing.
Connects via standard microphone (XLR) cable. 19” rack-mountable, 31?2” high. On/off switch. No A/C power cord required.
MBT Chase 8 RELAY PACK -Used $75 plus shipping.
Chase 8 Relay Chase speed can be selected anywhere from four per second up to 20 minutes per channel! An ideal timer for an automated light show to turn an effect light on for a few minutes, then switch to the next one.
Choice of (10) preset chase patterns. Includes eight grounded outlets (1 per channel) and one unswitched (always on) outlet, on/off switch, power cord. 19″ rack-mountable, 3 1/2″ high.
SABINE FBX 900 FEEDBACK EXTERMINATOR –Used $50 plus shipping.
Input impedance: unbalanced 10KΩ; balanced > 10KΩ, PIN 2 high.
Output impedance: balanced or unbalanced 10Ω nominal, PIN 2 high; maximum load 600Ω
Input/output maximum signal levels: balanced +24dBV peak; unbalanced +18dBV peak.
Headroom: balanced +20dB @ +4dBV nominal input; unbalanced +14dB @ +4dBV nominal input.
I/O connectors: XLR-3 and 1/4″ TRS.
Bypass: Switched, balanced to balanced; unbalanced to unbalanced.
Input/output transformer option.
Frequency response: < +/- 0.5dB, 20Hz to 17,000Hz. Signal to noise ratio: > 86dB typical (bal) @ +22dBV in.
Total harmonic distortion: < 0.015% @ 1 KHz @ +22dBV. Dynamic range: > 92dB.
Input to output gain variation: +/- 1dB.
Selectable noise gate.
FSR PN-2101S Pocket Navigator S-Video Switcher -Used $50 plus.
PN-2101S
Pocket Navigator 2 x 1 S-Video switcher with extra local monitor output.
Uses S-Video 4-Pin connectors.
Comes with locking power supply..
Designed for switching between two sources, these units
are practical and cost effective presentation solutions.
The Pocket Navigators are your A/B switchers for composite
video, S-video, computer video and stereo audio. The
units have active circuitry and buffer all signals, providing
the highest signal integrity.
Lighting Fixtures – Moving, Conventional & LED
Main Menu – Control Electronics – Lighting Effects – Dimmers & Acc – Audio Gear
Martin MX-10 Extreme -Used $250 plus shipping.
•250 W discharge lamp – Long lamp life (3000 hrs)
•12 interchangeable colors plus open
•8 interchangeable indexable rotating gobos plus open
•Interchangeable 3-facet rotating prism
•Separate shutter for strobe effect
•High-speed mirror
•Motorized focus
•DMX control
•Continuous operation – no cool down time needed
•8 prism/gobo pre-programmed macros for fast start-up
•All major safety approvals CE, ETL and CETL
•Rigorously tested for total reliability
Chroma Q DB4 Color Block LED -Used $100ea plus shipping.
The Chroma-Q® Color Block™ has a modular design and a comprehensive range of fixing options that allows users to easily create a complete LED system using stock of just one generic fixture type – including battens, blinders and various mounting configurations using the built in fixing.
•All-purpose design
•Modular construction
•Variable Effects Engine
•HSI (Hue, Saturation & Intensity) and RGB control
•Range of fixings
•Efficient thermal management
•Heavy gauge anodised aluminium extrusion
•Slimline design with cable management
•Whisper quiet cooling fan
Altman Focusing CYC Light -Used $100ea plus shipping.
•Rugged die-cast and sheet-aluminum construction
•Accept T-3 to T-8 laps from 300W to 1500W
•Broad, even light distribution
•Pivoting reflector allowing a multitude of focus angles
•Lockable, indexed reflector adjustment knob
•Highly polished and peened reflector with exclusive heat sink to improve longevity
•Asymmetrical distribution for even cyclorama washes
•Adjustable lampholders accepting T-3 to T-8 lamps of 4-11⁄16′′, 5-5⁄8′′, and 6-9⁄16′′
•Strong spring latches allowing tool-free interconnection for multiple units in a variety of configurations
•Multiple mounting and hanging configurations
•Three non-skid feet, height-adjustable to allow for use on unlevel surfaces
•Strong, extra fine safety screen provided
•Rear- mounted fold-down carry handle doubling as an attachment loop for safety cabling
•Color frame and safety cable included
•Three 36-inch high temperature lead wires
•Up to 25-feet of high temperature rubber cable optional
•Accepting stripped glass color frames with optional holder
•cETLus listed for indoor use (rated up to 1500 watts)
•Made in the USA
Altman Ground CYC -Used $50 plus shipping.
The Ground Cyc is multi-lamp, compartmented luminaire designed to provide an even wash of light on cycloramas from a ground row position.
The luminaire is be for use with 1000, 750, 500, and 300-watt double ended tungsten
halogen lamps. The unit is constructed of code gauge steel finished in a durable
baked black enamel and baffled to provide proper heat dissipation.
The light output of the luminaire shall allow for even illumination of a cyclorama from a
ground row position.
•Diecast and sheet steel construction
•Asymmetrical distribution for even cyc washes
•Compartmented for color separation
•Porcelain recessed single contacts on 9-inch centers
•Spring loaded color frame retainers
•Floor trunnions, color frames, and safety cable with spring clip included
•Safety screen(s) included
•cETLus listed for indoor use
•Made in the USA
Lighting Effects
Main Menu – Control Electronics – Lighting Fixtures – Dimmers & Acc – Audio Gear
MBT LED MOONRAKER EFFECT -Used $75 plus shipping.
162 bright LEDs (60 red, 36 green, 66 blue) arranged in a symmetrical pattern. It features 9 built-in chase programs plus sound active mode. It can be used as a stand-alone light, grouped together in a master/slave mode or controlled manually by a standard DMX controller. Includes 6 DMX control channels, including master brightness and strobe, a 3-pin XLR DMX in and out connections, and a 10 DIP switch bank for DMX addressing and function setting. An audio sensitivity control and hanging bracket are included. A large 8 inch lens allows for huge coverage making the LED MOON RAKER a top choice for nightclubs, theaters, DJs and bands. Size: 12” x 10” x 12”. Weight: 15 lbs. Power consumption: only 40 watts!
MBT LED MUSHROOM EFFECT -Used $75 plus shipping.
Large 8-lens centerpiece effect using 160 bright LEDs in red, green, blue and WHITE. Brilliant “flowering” patterns chase and pulse while the internal LEDs rotate to the beat of music.
Colorful, sound-active patterns can be projected on a dance floor, walls or ceiling in stand-alone or master/slave modes.
Or, connect to a DMX controller (4 channels) for manual control of the LEDs and rotation motor. 3-pin XLR input and output. Low powr (20 watts) and low heat make this an ideal choice for DJ, band and clubs.
American DJ Color Sweep -Used $60 plus shipping.
Sound-activated internal colored crown and shutter wheel rotate to create a powerful, stimulating multicolored effect. Designed to operate without a controller as a standalone unit. Speed control and sound sensitivity knobs give you a wide range of variation.
•Sound activated
•Speed and speed control
•5 colors plus white
•9 lenses
•Chasing effect
•Strobe effect
•Dimensions (LxWxH): 14.5” x 14.5” x 8.5” / 268 x 368 x 216 mm
•Lamp: 1 x LL-EVD 36V 400W
MBT LED BEEHIVE EFFECT -Used $75 plus shipping.
The LED BEEHIVE effect…
36 round 1″ lenses in a dome-shaped all metal housing. Light: 6 ultra bright 3W LEDs (2 red, 2 green, 2 blue).
The result is 216 sharp colorful beams moving around a room or dance floor. Dual operation mode switch: Auto (slow constant beam movement) or Sound (clockwise/counterclockwise beam movement to the beat of music).
Audio sensitivity knob. Only 20W. Compact (10” x 10” x 14”) and lightweight (8 lbs) make it ideal for bands, mobile DJ’s and a centerpiece light for small clubs.
Dimmers & Acc
Main Menu – Control Electronics – Lighting Fixtures – Lighting Effects – Audio Gear
ENR 166-362 Dimmer Module -Used $40ea plus shipping.
ENR 166-362 Dimmer Module
Used ENR dimmers, some Leviton.
This dimmer module is for use in Colortran ENR dimming racks and Colortran Topaz dimming racks.
Input: 40 amps, 100/120 volt, 50/60 Hz.
Load: 2 circuits, 2.4kw max @ 120 v, 2.0kw max @ 100V
30 available at time of posting.
ETC LMI L86-0000 BLANK MODULE / Condition-Used
ETC LMI L86-0000 BLANK MODULE
USED
30 DAY WARRANTY
30 available*
*at time of posting.
ETC LMI L86-EMB MODULE BLANK – USED – 30 DAY WARRANTY – 12 available at time of posting.
$10 ea
Shipping is not included.
Call to arrange shipping.
Audio Gear
Main Menu – Control Electronics – Lighting Fixtures – Lighting Effects
CLEAR-COM KB 212 -Used $175ea plus shipping.
The KB-212 remote speaker station connects to a single channel of party-line intercom,
and operates in half-duplex mode, similar to a walkie-talkie. It features both an integral
speaker and a flush-mount electret microphone with mic limiter and a push-to-talk button.
The station may be programmed via two internal dip switches to operate in four different modes, activated by other stations within the intercom system.
Denon CD/Cassette Player -Used $135 plus shipping.
3U, 19-inch rack-mountable
Simultaneous playback of both CD and cassette tape
Mixed output of sound possible from both CD and cassette tape without using a mixer
Easy recording from CD to cassette
When combined with a mixer, sound from a CD and a microphone can be mixed and recorded to a cassette deck
IF Remote Receptable
Headphone jack and volume control
Headphone Source Select switch
Wired Remote Control terminal
Balanced (XLR) In/Out terminals
PANASONIC PRO DAT SV-3800 -Used $300 plus shipping.
Based on the popular SV-3700, the SV-3800 incorporates technological refinements for enhanced sound quality and functionality.
Front-panel shuttle wheel; 0.5-15X speed range;
IR remote control;
4 stage, 1-bit Delta-Sigma A-to-D converters;
20-bit equivalent D-to-A converters;
Program, absolute and time-remaining displays;
Pushbutton selection of 44.1kHz/48kHz sampling rates via either analog or digital inputs;
Pushbutton fade-in and fade-out functions;
Balanced inputs and outputs via XLR type; connector with choice of -10dBu or +4dBm output levels;
Up to 400X fast forward/rewind and search speeds to provide high-speed access to any point on a 2-hour DAT tape within 27 seconds;
Single program and skip play feature is handy for post production work;
MACKIE ONYX 1640 -Used $375 plus shipping.
Rack Mount: rack-mountable
Channels Qty (for SD): 16-channel
Mic Phantom Power: 48 V
Control Types: knobs
Headphones Output: Yes
CHANNEL DESCRIPTION
Mic Channels: 16 mono
Mic Channels Connector: XLR
Line Channels: 16 mono
Line Channels Connector: phone stereo 6.3 mm
EQ Band Qty: 4
SABINE GRAPHI-Q -Used $100ea plus shipping.
The Graphi-Q combines four indispensable audio products into one very affordable, all-digital package….with an easy to use hands-on interface! With the touch of a fader you can shape your frequency response using the GRAPHI-Q’s 31-band digital graphic EQ. Need more control? Use the parametric EQ to control your filter width, depth and frequency. Time align your speakers with the digital delay. Manage your system gain with the GRAPHI-Q digital compressor/limiter. Finally, add 3 to 9 dB extra gain and automatic feedback control with Sabine’s patented FBX technology. The GRAPHI-Q gives you instant hands-on, front panel control for every function. RS-232 remote computer control, over 70 on-board program memories and remote switching via contact closures are standard. All-in-all, you get a fantastic level of control and incredible performance for a super-low price! Features
31-band Digital Graphic EQ, with 6 or 12 dB range and High & Low Cut Filters
Patented FBX Feedback Exterminator
12 Filters; switchable to fully parametric (GRQ Remote)
Automatic TURBO FBX Setup Mode via GRQ Remote Software for Windows
Full-featured digital Compressor/Limiter
Digital Delay, with up to 1 second delay, adjustable in 20 microsecond increments
2 available as of posting.
GALAXY PA5X140 -Used $100 plus shipping.
Galaxy Audio’s CORE Series X amplifiers are the product of rigorous engineering and the latest advances in technology. The Class H power supply configuration utilizes four output transistors, a low voltage pair and a high voltage pair. Its low voltage transistors are active with any signal.
Class H amplifier
SmartALIC gain management
100 watts @ 8 ohms (typically 146 watts @ 4 ohms)
Frequency response: 200 Hz-20 kHz
Total Harmonic Distortion: < 0.06 @ 8 ohms, < 0.1 @ 4 ohms
EQ: Three band, center-detent controls
Input connections (with individual volume controls): One balanced 1/4″, One balanced XLR (with +24 VDC phantom power)
Output connections: One 1/4-inch speaker level, One (post-EQ, post-level) RCA line out
Indicator LEDs: Power, Compressor-Limiter
One 5″ driver with 40 oz. magnet structure
Sensitivity: 98 dB @ 1 watt/1 meter
Fire retardant styrene with cast aluminum grille
Built-In mic stand mount
MEYER CQ-1 -Used $1800 plus freight.
FROM RENTAL STOCK
21.00″ w x 30.00″ h x 22.20″ d
(533 mm x 762 mm x 564 mm)
130 lbs (58.97 kg); shipping 150 lbs (68.04 kg)
All birch multi-ply
Black textured
Perforated hex metal grille frame with charcoal-grey foam
Ring and stud pan fittings, two on both top and bottom.
Working load for each fitting is 500 lbs (226.80 kg), which
is 1/5 the cabinet breaking strength (with straight tensile
pull); 3/8”
650-P SUBWOOFER -Used $1800 plus freight.
FROM RENTAL STOCK
The Meyer Sound 650-P is a high-powered subwoofer for sound reinforcement applications. The 650-P provides extended low-frequency power bandwidth, handling high continuous operating levels and extreme transient information with minimal distortion and response extending to 28 Hz.
The 650-P houses two Meyer Sound long-excursion 18-inch drivers in a tuned, vented cabinet. An integral two-channel class AB/H amplifier with complementary power MOSFET output stages supplies total peak output of 1240 watts (620 watts/channel). TruPower limiting technology ensures maximum driver protection, minimizing power compression and permitting high constant output.