DF-50: Fluid Filter info

DF-50: Fluid Filter info
The Fluid filter in a DF-50 is: Watts Fluldair, Inc.
Kittery, Maine 03904

Model: F504-02AHS
Serial: 9311 

NSI DDS8800 DDS9800: Trouble Shooting

NSI DDS8800 DDS9800: Trouble Shooting
If the dimmer fires as such:
DMX Dimmers firing
--- --------------
1 1 & 2
2 3
3 4
4 6
5 5 & 7
6 8
7 -
8 -

... Then the dimmer is set for 6 Channels: P3 MUST BE JUMPED for 8 Ch. 

Duraflex Cable 12142586SS Specification

/kb/articles/cable/duraflex/12142586SS.doc/kb/articles/cable/duraflex/12142586SS.doc

Arri Daylite 575 PinOut

Pin Out for Arri Daylite 575

A - On/Off
B - -nc-
C - Ign 3
D - Ign 2 or 2-1
E - Safety Switch
F - Ign 1
G - Gnd 

PRO CO D-System Pinout for ELCO 8016-056

PRO CO D-System Pinout for ELCO 8016-056
Pin A 1S
B 2S
C 3S
D 4S

E 1H
F 2H
H -nc-
J 3H
K 4H

L 1C
M 2C
N 3C
P 4C
R 5S
S 6S
T box no longer used
U 7S
V 8S

W 5H
X 6H
Y 7H
Z 8H

a 5C
b 6C
c 7C
d 8C

e -nc-
f -nc-
h -nc-
j -nc-
k 9S
l 10S
m 11S
n 12S

p 9H
r 10H
s 11H
t 12H

u 9C
v 10C
w -nc-
x 11C
y 12C

z 13S
AA 14S
BB 15S
CC 16S

DD 13H
EE 14H
FF -nc-
HH 15H
JJ 16H

KK 13C
LL 14C
MM 15C
NN 16C 

Shure Wireless LX4 & T4 Problem

Shure Wireless LX4 & T4 Problem
There is a problem with LX4 & T4 receivers manufactured between
June and July 1995: S# 060295 to 080495. If you have a unit within these s#,
contact shure 1-800-44-SHURE. 

Pinout for Relay RS 275-241

Pinout for Relay RS 275-241
nc coil [x]

|
5.08
|
no coil com
|<-2.54->|<-----5.08----->|
-----------------------------------

no = Norm Open
nc = Norm Closed
Voltage = 12VDC
Coil Res = 320 ohms
nom Cur = 37.5mA
Contacts = 1A @ 125VAC 

Notes on Fuses

ABC :
FAST ACTION CERAMIC, Rated 250V for 20A or less, and 120V for above.
1/4" x 1 1/4" (6.4mm x 31.8mm)

AGC :
FAST ACTION GLASS, Rated 250V for 10A or less, and 32V for above.
1/4" x 1 1/4" (6.4mm x 31.8mm)

AGX :
FAST ACTION GLASS, Rated 250V for All sizes.
1/4" x 1" (6.4mm x 25.4mm)

MDA : TIME-DELAY CERAMIC, Rated 250V for 20A or less, and 120V for above. 1/4" x 1 1/4" (6.4mm x 31.8mm)

MDL :
TIME-DELAY GLASS, Rated 250V for 8A or less, and 32V for above.
1/4" x 1 1/4" (6.4mm x 31.8mm)

 

LeMaitra G150 Remote Setup

Set the slide switch on the Fog Unit as Follows:
Standard 0-10V Remote Set switch = 0
DMX Remote Set switch =1

Colortran Viewpoint Battery

Colortran Viewpoint Battery
BR2325 3.0V Lith

Common DMX Receiver Chips

ETC Expression Express 75176 + Opto 6N137
HES Technobeam 75176 + Opto 6N137
NSI MAX485 

DB9 to CAT5 Adaptor Uses

Protocol       Computer      device
ETC Unison      DB9F          DB9M
ETC NET Video   DB9F          DB9FN
NSI IF501       DB9F          DB9FN
Mackie 810      DB9F          DB9M
Pan TVS75       DB9F          DB25MN
Pan TD816       DB9F          DB9FN

Gilderfluke PC-MAX Hints

-  How to move the Starts of show back or forth: 
a]  Make sure the show will be long enough to fit when the start is moved fowards.  To change the show legnth, [FILE] [SHOW PROPERTIERS] show legnWhen you change the start time of a show, you must insert or delete 

CAT 5 568A 568B Wiring

T568A:
1-w/gr,  2-gr, 3-w/or, 4-blu,
5-w/blu, 6-or, 7-w/br, 8-br

T568B:
1-w/or,  2-or, 3-w/gr, 4-blu,
5-w/blu, 6-gr, 7-w/br, 8-br

CAT5 RJ45 to DMX Wiring Standards

CAT5 – DMX PIN-OUT

 

Pair Wire # Color Function XLR Pin

====================================================

Pair 2 1 white / orange data A + DMX512 Pin 3

2 orange data A - DMX512 Pin 2

Pair 3 3 white / green data B+ DMX512 Pin 5

6 green data B - DMX512 Pin 4

Pair 1 4 blue v not exceeding - 0 / + 25 VDC

5 white / blue wire #4 common

Pair 4 7 white / brown signal common DMX512Pin 1

8 brown signal common DMX512 Pin 1

Windy City Wire 042003

P/N 042003 - Lo-Capacitance, 24 AWG, 2 Pair Each Pair Shielded, 12.5 pF, 100 Ohm, Plenum
Cable Specifications Description: 2 Pair, 24 AWG Tinned Copper Individually Shielded Pairs RS-232, RS-422 Low-Capacitance Communication, Instrumentation and Special Application Plenum Cable Conductor Description: 24 AWG (7/32) Tinned Copper, OD: .024" Nom. Insulation: Foam FEP; OD: .054" +-.002" Color Code: Pair 1: White/Blue, Blue/White Pair 2: White/Orange Orange/White Shield: Aluminum/Polyester-25% Overlap-Foil Out Drain Wire: 24 AWG Stranded Tinned Copper Jacket: Low-Smoke Plenum Rated PVC Marking: TEMPERATURE CONTROL SYSTEM LOW CAP 12.5 pF, ZONE BUS / COMM A B C D E 0 1 2 3 4 5 6 7 8 924 AWG Shielded Type CMP (UL) 75C Overall Diameter: .235" Nom. Conductor DCR: 26.8 Ohms/Mft. Max. Capacitance: 12.5 pF/ft. Nom. (Mutual), 23.0 pF/ft. Nom. (Cond- Impedance: 100 Ohms Nom. Velocity of Propagation: 82% Temperature and Voltage Rating: -10 C to 75 C / 300 Volts Max. Cable Weight: 23 Lbs/Mft.
Flame Rating: Approved for Plenum use without conduit per NEC Article 800 by passing UL-910 Steiner Tunnel test (USA). Agencies Approvals: UL Subject 444 and NEC Article 800 Type CMP Communication Cable.

windy city wire 001360

Temperature Control SmartWire™    UL Listed and Rated Type CMP or CL3P Multi-Conductor Un-Shielded Plenum Cable P/N 001360 - 16 AWG 2 Conductor Non-Shielded Plenum Cable Specifications Description: 16 AWG 2 Conductor Bare Copper, Non-Shielded Plenum, UL Subject 444, Type CMP, C(UL). Conductor Description: 16 (19/29 Bare Copper) Insulation: Low-Smoke PVC .010" Color Code: Black/White Jacket: Low-Smoke PVC .020" Marking: TEMPERATURE CONTROL SYSTEM AN BIN DIG IN / OUT A B C D E 0 1 2 3 4 5 6 7 8 9, 16 AWG CMP (UL) C(UL). Overall Diameter: .180" Nom. Conductor DCR: N/A Capacitance: N/A Impedance: N/A Temperature and Voltage Rating: 60 C / 300Volt Cable Weight: 25 Lbs/Mft. SmartWire Data View Webmercial SmartWire™ Overview SmartWire™ PDF Flame Rating: Approved For Plenum Use Without Conduit Per NEC Article 800 by Passing UL-910 Steiner Tunnel Test Agencies Approvals: NEC Article 800; 725, UL CMP, C(UL)

Copyright © 2002 Windy City Wire, Inc. All rights reserved. 4250 Madison Street, Hillside, Illinois 60162   Tel: (708) 493-1191   Toll Free: (800) 379-1191   Fax: (708) 493-1380

Windy City Wire 001230

Temperature Control SmartWire™    UL Listed and Rated Type CMP or CL3P Multi-Conductor Shielded Plenum Cable P/N 001320 - 16 AWG 2 Conductor Shielded Plenum Cable Specifications Description: 16 AWG 2 Conductor Bare Copper, Shielded Plenum, UL Subject 444, Type CMP, C(UL). Conductor Description: 16 (19/29 Bare Copper) Insulation: Low-Smoke PVC .010" Color Code: Black/White Shield: Overall Aluminum Polyester Foil - 100% Coverage Drain Wire: 24 AWG 7 Strand Tinned Copper Jacket: Low-Smoke PVC .020" Marking: TEMPERATURE CONTROL SYSTEM AN BIN DIG IN / OUT A B C D E 0 1 2 3 4 5 6 7 8 9, 18 AWG CMP (UL) C(UL). Overall Diameter: .189" Nom. Conductor DCR: N/A Capacitance: N/A Impedance: N/A Temperature and Voltage Rating: 60 C / 300Volt Cable Weight: 34 Lbs/Mft. SmartWire Data View Webmercial SmartWire™ Overview SmartWire™ PDF Flame Rating: Approved For Plenum Use Without Conduit Per NEC Article 800 by Passing UL-910 Steiner Tunnel Test Agencies Approvals: NEC Article 800; 725, UL CMP, C(UL)

Duraflex Cable 12142586SS Specification

PRODUCT SPECIFICATION DURA-FLEX Part Number: 12/142586 Product Description : A Twelve (12) Gauge -- Fourteen (14) Conductor -- Bare Copper With PVC Insulation, Reverse Planetary Laid, Rugged, Oil Resistant, PVC Jacketed, Yet Highly Flexible Instrumentation Cable. Conductor Data: Material Bare Copper Gauge 12 AWG Stranding 65 x 30 Insulation Data: Material Polyvinylchloride Nominal Wall Thickness .022” Diameter (primary) .140” Cabling Data: Number Of Conductors 14 Conductor Identification Cond. 1 Red, No Number Cond. 2 - 12 White, Black Number Cond. 13 Green Cond. 14 Green With Yellow Stripe Center Filler Polyvinylchloride / Black O/A Tissue Tape Jacket Data: Material Polyvinylchloride (Oil Resistant) Color Black Markings White Lettering, Also Indented Nominal Wall Thickness .080” Diameter (O.D.) .785” Legend DURA-FLEX 12AWG 14/C RU AWM STYLE 2586 600V 105C VW-1 E167231-A ---- CSA AWM I A/B II A/B 105C 600V FT1 LL71737 Product Ratings: Weight .535 lbs./ft. Temperature Range -20°C to 105°C Voltage 600 Volts UL Approval RU AWM STYLE 2586 600V 105C CSA Approval CSA AWM IA/B IIA/B 105C 600V FTI

DMX Option Conversion NC700 NC7000 NSI

NSI Microplex Specification

Microplex:

Negative going pulses (reset and clock need to be at least -2v and not more than -12v.
Positive pulses (dimmer levels) should go between 0 and +10v (ok to go as high a +13v).

The length of the reset pulse needs to be at least 2 msec.
Analog (dimmer levels) pulses should be at least 150 usec.
Clock pulses should be at least 100 usec.
The maximum number of dimmers that can be sent is 128.
The minimum is 1.
Extending reset, analog, and clock pulses excessively beyond minimum times
can result in stepping and drifting as packet times increase reducing refresh rates.
In general, it is a good idea to not let a packet time extend beyond 25 - 30 msec.
You will start to see stepping beyond that.

Electro Controls 09-1000 Alpha PAC.

Electro controls 09-1000 Alpha PAC with alpha dim dimmers.

Speakon Switch Box

Speakon Switch Box

The switch used in the Theatrix Speakon switch box is:
Newark elec. part number 703-91T-3400-001 (Amph 47F023) 

Altman Explorer Followspot Notes

Connector on Ballast Cable the PLUGS INTO HEAD (with locking ring)

Amphenol 97-3057-1012

Welcome to the Theatrix Knowledgebase V 2.0

You are welcome to use our knowledgebase.

DO NOT ABUSE IT

You are responsible for understanding the copywrite status of anything in this knowledgebase

HX Family of Lamps

�HX� Family of Lamps
Type	Voltage	Watts	Color Temp	Lumens	Life	Filiment	Base	Socket	Notes
HX-400	115	375	3200	10000	300	CC-8	G9.5	TP-22	1
HX-401	115	375	3050	8500	1500	CC-8	G9.5	TP-22	1
HX-600 / FLK	115	575	3200	16500	300	CC-8	G9.5	TP-22	1
HX-601 / FLK / LL	115	575	3100	12800	1500	CC-8	G9.5	TP-22	1
HX-602	115	575	3200	16500	300	.	G9.5	TP-22	2
HX-602 / HV (GVK)	230	600	3200	-	400	.	G9.5	TP-22	2
HX-603	115	575	3050		1500	.	G9.5	TP-22	2
HX-604 / GLC	115	575	3200		400	.	G9.5	TP-22	3
HX-605 / GLA	115	575	3050		1500	.	G9.5	TP-22	3
HX-754 / GLD	115	750	3200		300	.	G9.5	TP-22	4
HX-755 / GLE	115	750	3050		1500	.	G9.5	TP-22	4
HX-800	230	800	3200	20000	250	C-13D	G9.5	.
HX-800	240	800	3200	20000	250	C-13D	G9.5	.
HX-2400 / CYX	115	2400	3200		400	.	G9.5	TP-22	5
Notes:
1	Compatible with FEL (Early Axial Ellipsoidals)
2	Later Axial Ellipsoidals with Planar (Grid) Filiments.
3	Current Axial Ellipsodials with more compact filament
4	High Wattage fixtures only
5	For Fresnel Spotlights with a more compact Planar (Grid) filament.
All EVEN numbered HX lamps are 3200 Deg. K.,      All ODD numbered lamps are Long Life.Life.

HME Dynamic Headset Adaptor

MD-XLR4M

G27245-1